OffshoreCorpTalk Scheduled Upgrade and Maintenance on September 25th
- Thread starter JohnLocke
- Start date
- Status
Just not to overlook this – does it mean that before upgrade, your posts were automagically merged? I am asking because I remember that a (relatively) long time ago this feature was working for me; but it has stopped working some months ago... (Honestly, I have not cared, as with my access rights I can merge any posts anywhere – my bad, probably...)
OT: I am back from holidays, greetings to all 😉
I performed testing with PaleMoon and Chromium︀ on Linux platform – all fine.
Apparently, there are certain issues on︆ “small devices platforms”. @mraleph, would you mind sharing your assumption about the root of︇ the problem? Just out of my curiosity 😉
aniglo22 said:
I'm using internet explorer 9 and︈ nothing works :{
From desktop or laptop, I guess. The only one mobile platform running IE 9 was︊ Windows Phone 7.5, AFAIK; and these devices probably cannot run well today at all, I︋ am afraid. Anyway, IE 9 is too incompatible with contemporary standards that the functionality of︌ any webpage cannot be guaranteed, unfortunately.
OT: I am back from holidays, greetings to all 😉
I performed testing with PaleMoon and Chromium︀ on Linux platform – all fine.
Apparently, there are certain issues on︆ “small devices platforms”. @mraleph, would you mind sharing your assumption about the root of︇ the problem? Just out of my curiosity 😉
aniglo22 said:
I'm using internet explorer 9 and︈ nothing works :{
From desktop or laptop, I guess. The only one mobile platform running IE 9 was︊ Windows Phone 7.5, AFAIK; and these devices probably cannot run well today at all, I︋ am afraid. Anyway, IE 9 is too incompatible with contemporary standards that the functionality of︌ any webpage cannot be guaranteed, unfortunately.
Yes and I also received a notification of that.
Toggle signature
@JohnnyDoe ”“ Your #1 Source for Guidance in Different Offshore Fields
Still same problem
Toggle signature
@JohnnyDoe ”“ Your #1 Source for Guidance in Different Offshore Fields
Problems solved for me too thu&¤#
Toggle signature
@JohnnyDoe ”“ Your #1 Source for Guidance in Different Offshore Fields
No my posts still don't merge
Toggle signature
Toggle signature
@JohnnyDoe ”“ Your #1 Source for Guidance in Different Offshore Fields
Back-end technologies shouldn't be discussed publicly 😉
But, similar glitchy behavior that I/we experienced with our management portals that has status notifications - it was related to database back-end, number of transactions and connections and priority of delivering those notifications to certain user roles, channels (in-portal notification, email, our mgmt application, sms and call) and devices.
Wherever some front-end and back-end needs to be synchronized as in web 🙄 I'm getting hair ns2 I'm fan︀ of a terminal 😎
But, similar glitchy behavior that I/we experienced with our management portals that has status notifications - it was related to database back-end, number of transactions and connections and priority of delivering those notifications to certain user roles, channels (in-portal notification, email, our mgmt application, sms and call) and devices.
Wherever some front-end and back-end needs to be synchronized as in web 🙄 I'm getting hair ns2 I'm fan︀ of a terminal 😎
Noted.
Also for me 😉
------
A new issue 🙁
In conversation (now called Direct Messaging) I cannot post a simple reply to previous messages. The corresponding field simply does not exist, there is just a button “Post reply”. It is necessary to reply quoting some message posted before (and, eventually, to erase the quoted content – this is the workaround 😉 ).
PaleMoon 33.1.1 and Chromium 120.0.6099.224, Linux platform (Devuan Chimaera) – the same behaviour.
I think it is a regression, from what I recall, it was working during our previous tests.
UPDATE:
Another issue with Direct Messaging
When I try to edit a message M that I have already posted, I receive︀ just a message
“Oops! We ran into some problems.
The requested message could not be︁ found.”.
But when I try to reply quoting the message M, this message shows in︂ the Reply field, as it should 🙁
The same configuration as for the previous issue.
Honestly, I do not recall whether I tested this in the testing phase or not.
Anyone is encouraged to reproduce on a different platform / configuration, especially on a small device︃ (I do not use it).
Also for me 😉
------
A new issue 🙁
In conversation (now called Direct Messaging) I cannot post a simple reply to previous messages. The corresponding field simply does not exist, there is just a button “Post reply”. It is necessary to reply quoting some message posted before (and, eventually, to erase the quoted content – this is the workaround 😉 ).
PaleMoon 33.1.1 and Chromium 120.0.6099.224, Linux platform (Devuan Chimaera) – the same behaviour.
I think it is a regression, from what I recall, it was working during our previous tests.
UPDATE:
Another issue with Direct Messaging
When I try to edit a message M that I have already posted, I receive︀ just a message
“Oops! We ran into some problems.
The requested message could not be︁ found.”.
But when I try to reply quoting the message M, this message shows in︂ the Reply field, as it should 🙁
The same configuration as for the previous issue.
Honestly, I do not recall whether I tested this in the testing phase or not.
Anyone is encouraged to reproduce on a different platform / configuration, especially on a small device︃ (I do not use it).
That is a web-design issue ns2
After gory experience with web-designers, I concluded︀ that the best course of action is to regress back to terminal 😛 - a coloured︁ one.
Report back to your web-designers and hope. Just hope. And pray that they don't︂ f**k up the back-ends.
After gory experience with web-designers, I concluded︀ that the best course of action is to regress back to terminal 😛 - a coloured︁ one.
Report back to your web-designers and hope. Just hope. And pray that they don't︂ f**k up the back-ends.
Wow. Both issues seem to be fixed, as of now.︅
If this is caused by some quick patch and not by some solar eruption, hats︆ off 😉
Again, anyone is encouraged to reproduce on a different platform / configuration, especially on︇ a small device (I do not use it).
If this is caused by some quick patch and not by some solar eruption, hats︆ off 😉
Again, anyone is encouraged to reproduce on a different platform / configuration, especially on︇ a small device (I do not use it).
Sorry, Direct Messaging again 😉
After the last patch, I am missing “The last read date” info after the names of the participants (quite an important information, IMO). It was visible before.
The same configuration as for the previous issues reported by me.
After the last patch, I am missing “The last read date” info after the names of the participants (quite an important information, IMO). It was visible before.
The same configuration as for the previous issues reported by me.
When you read the OCT from an iOS home - install the app as add to home screen - in previous version there was a small back button on the left side at bottom. After the upgrade, there isn't. Can you put it back?
Previously, when you click on a specific post in forums list, you would be pointed to that - as a last one. Now, you are directed to a forum and not even thread.
Also, latests posts are for forum in general - per some time logic - not the logged in user, while previously new posts were actually new content for you.
Previously, when you click on a specific post in forums list, you would be pointed to that - as a last one. Now, you are directed to a forum and not even thread.
Also, latests posts are for forum in general - per some time logic - not the logged in user, while previously new posts were actually new content for you.
It looks like it was an extension that was installed and that now is disabled, things should work fine now. We will get the extended conversation MOD installed as soon as possible again.
- Status